Quick Facts
- All metal stain removers
- Works on all surfaces including vinyl and fiberglass
- Removes metal and organic stains
- Made in the United States
- Adjust pH to a minimum 7.4
- Circulate the pool for 1 hour, then turn the pump off.
- Allow water to become still
- Sprinkle the granules over the most heavily spotted areas. Use 1 lb. for ever 10,000 gallons of pool water.
- Let the solution sit for 1 hour, then run the pump.
- Check calcium hardness and alkalinity levels. Balance the water if necessary
- Follow up with SeaKlear Metal Klear at a rate of 1 qt. per 10,000 gallons.
- Clean filter 24 hours after treatment.
- All-Metal Stain Remover
- Can Be Used on Vinyl and Fiberglass
- Effectively Removes Tannin, Organic, Copper, Iron and Manganese Stains







Reviews
There are no reviews yet.