SR Smith StarGlo Landscape Light Fixture | Without Fiber | SG-100

 

StarGlo fixtures are flexible and are great for lighting up rock waterfalls and landscape features. Using StarGlo fixtures (or kits) you can light areas of cascading water in the waterfall. The StarGlo fixtures should be placed above water level and pointed towards areas where the most water action will occur. This will typically be at the bottom of a waterfall with the StarGlopointed back towards the cascading water.

 

 

HOW TO DO IT – This method should be done during the construction of the

waterfall, but can be done afterwards by hiding the pipe or conduit with rocks and concrete. Using StarGlo fixtures (or kits) you can light areas of cascading water in the waterfall. The StarGlo fixtures should be placed above water level and pointed towards areas where the most water action will occur. This will typically be at the bottom of a waterfall with the StarGlo pointed back towards the cascading water. DO NOT place the StarGlo submerged under water! It is NOT a watertight fitting! Use 1″ PVC pipe or conduit from the illuminator to each StarGlo location, then reduce to 1/2″ FIP to allow the fixture to thread in. Always use sweep 900 fittings to allow the fiber to be installed easily. 25, 50, or 75 strands of fiber may be used.

 

WHAT IT DOES – This method will light the splashing water with a small flood of light.

 

DO NOT place the StarGlo submerged under water! It is NOT a watertight fitting!